| |
|
|
VoIP Paging System Gateways 4-ports FXS/FXO
|
Model #MVP410BG |
Bogen’s voice over IP gateways (Models MVP130BG, MVP210BG, MVP410BG, and MVP810BG) allow
paging communications to be sent over the Internet or Intranet. FXS pass through expands the paging
capabilities of Bogen’s PCM zone paging system by providing a continuous connection between buildings using
a Local- or Wide-Area Network.
Bogen’s VOIP gateways are available in models ranging from 1 to 8 ports. Each gateway connects directly to
Bogen paging systems and equipment to provide overhead paging to all locations within a facility or across a
campus without running new lines. The 1-port model supports FXS and FXO. Multi-port models support FXS,
FXO, and provide contact closure Receive & Transmit in E&M mode.
The VOIP gateways are easily managed locally using a Windows®-based software application or remotely with a
web browser or SNMP.
Bogen’s VOIP gateways can also be used for toll-free voice or fax communications when connected to phones,
fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office
on your VOIP network.
Page Your Warehouse From Anywhere
|
 US $1,668.60 |
 |
Product
Features:
- • 1-, 2-, 4-, or 8- analog ports for communication over an
existing IP network or the Internet
• Ethernet connectivity and full IP compatibility with
existing routers and WAN infrastructure
• Overhead voice paging to multiple locations within a
facility, nearby or branch office buildings, or to remote
locations
• Single- or multi-zone paging at any or all locations when
used with Bogen’s Multi-Zone telephone paging
interface (UTI312)
• Efficiently communicate company-wide emergency
alerts or general announcements
• FXS/FXO connectors on each port for direct connection
to Bogen’s telephone paging interfaces
• Configuration and management using a Web
browser or Microsoft Windows®
• Utilizes the H.323 or SIP protocols to provide
complete interoperability with other Internet telephony
solutions
• Multi-port models provide contact closure Receive &
Transmit in E&M mode
• Connects directly to telephone or PBX
• Single Port Protocol (SPP) allows the use of
dynamic IP addresses
• Voice compression to 5.3K bps per call with
support for multiple algorithms, including ITU G.723
and G.729
• Minimum requirements: Ethernet network, WAN
connection, IP addresses
• Supports H.450 supplementary services to provide for
call transfer, call forwarding, call hold, call waiting and
name identification
• T.38 real-time fax relay for interoperability among other
VOIP equipment
• PSTN fail-over automatically routes calls over the
PSTN network if the IP network is down
• Two-year warranty
|
|
|
|
|
