|
 |
Model #RPK82
Rack Mount Amplifier Kit for TPU35/60/100B... Find Out More |
$25.64
|
|
|
 |
Model #RPK84
Rack Mount Kit for TPU35/60/100B... Find Out More |
$25.64
|
|
|
|
 |
Model #VAR1
The VAR1 Tone Generator is a relay device that monitors audio activity over a wide range of input voltages and operates two sets of C-Form relay contacts in response to detected activity. The VAR1 can be used to detect voltages as low as signals directly from a microphone or as high as signals from ... Find Out More |
$98.79
|
|
|
 |
Model #PRS40C
These power supplies are designed to supply the low voltage DC requirements for all of Bogen’s products.
Corded or outlet mounted, 120V AC primary supply input... Find Out More |
$19.78
|
|
|
 |
Model #RPK46A
Rack Mount Kit for TP30D(1-3/4" High)... Find Out More |
$26.92
|
|
|
|
 |
Model #RK78
Rack Panel Kit for CR100A(3-1/2" High)... Find Out More |
$51.73
|
|
|
 |
Model #TL100
1:1 Ratio Plug-In transformer... Find Out More |
$41.66
|
|
|
 |
Model #TL600
Plug-In: 600 ohms Transformer... Find Out More |
$54.78
|
|
|
 |
Model #AT10A
The AT-Series of attenuators allows the output level of a group of loudspeakers to be set from a wall-mounted volume control, without affecting overall amplifier volume settings. These rugged attenuators have 10 levels of sound control, plus an off-setting.... Find Out More |
$23.87
|
|
|
 |
Model #AT35A
The AT-Series of attenuators allows the output level of a group of loudspeakers to be set from a wall-mounted volume control, without affecting overall amplifier volume settings. These rugged attenuators have 10 levels of sound control, plus an off-setting.... Find Out More |
$27.54
|
|
|
 |
Model #PRS48
Bogen's PRS 120V to -48VDC Power Supply is specially designed for use with Bogen equipment~Wide range of voltages and current outputs~Loop Start paging interface built-in (PRS624DA & PRSASAC models only). Bogen Model PRS48, provides 48V DC at 100 mA from a 120V AC, 60 Hz source. Maximum power consum... Find Out More |
$59.93
|
|
|
 |
Model #PRS624DA
These power supplies are designed to supply the low voltage DC requirements for all of Bogen’s products.
Corded or outlet mounted, 120V AC primary supply input... Find Out More |
$209.05
|
|
|
 |
Model #RF24A
These power supplies are designed to supply the low voltage DC requirements for all of Bogen’s products.
Corded or outlet mounted, 120V AC primary supply input... Find Out More |
$101.38
|
|
|
|
 |
Model #TG4C
The Model TG4C Multiple Tone Generator is a compact, reliable unit designed to generate four distinct
signals: pulsed tone; slow whoop; repeating chime; and steady tone.
It is an excellent source for alarm or pre-announce signals in public address or telephone paging systems.
The TG4C will accept... Find Out More |
$119.15
|
|
|
 |
Model #PRS2403
The power supply shall be a Bogen Model PRS2403,
or approved equivalent, and shall supply 24V DC at
300 mA (6 CU) from a 120V AC, 60 Hz source.The
PRS2403 shall be capable of being connected to
barrel-type connectors or screw terminal connections.
The PRS2403 shall be receptable-mounted.The
po... Find Out More |
$19.24
|
|
|
 |
Model #SPS2406
Bogen’s 24V DC Power Supplies are designed to supply power to 24V DC equipment from a 120V AC source.
They are rugged, versatile, and dependable, and are suitable for use with many types of telephone paging
equipment, amplified speakers and horns, tone generators, and intercom systems.
The SPS ve... Find Out More |
$39.49
|
|
|
 |
Model #SPS2425
The power supply shall be a Bogen Model SPS2425,
or approved equivalent, and shall supply 24V DC at
2.5A (50 CU) from a 120V AC, 60 Hz source. The
SPS2425 shall be wall-mountable using a holster with
pluggable terminal strips. The power supply shall
measure 3" W x 5-3/4" H x 1-3/4" D and weigh ... Find Out More |
$79.99
|
|
|
 |
Model #SPS2454
The power supply shall be a Bogen Model SPS2454,
or approved equivalent, and shall supply 24V DC at
5.4A (108 CU) from a 120V AC, 60 Hz source.The
SPS2454 shall include a power LED. The SPS2454
shall be wall-mountable using a holster with pluggable
terminal strips.The power supply shall measure... Find Out More |
$142.76
|
|
|
 |
Model #SPS2410
The power supply shall be a Bogen Model SPS2410,
or approved equivalent, and shall supply 24V DC at
1A (20 CU) from a 120V AC, 60 Hz source. The
SPS2410 shall be wall-mountable using a holster with
pluggable terminal strips. The power supply shall
measure 2-1/2" W x 4-1/4" H x 1-1/4" D and weig... Find Out More |
$59.74
|
|
|
 |
Model #SCR25A
The Bogen Model SCR25A Call-In Module is an annunciator latching control bank designed for use with room
selector panels in Bogen Multi-Graphic® systems.The SCR25A provides 25 silicon controlled rectifiers (SCR)
and permits the use of momentary switches without SCRs.
The silicon controlled rectif... Find Out More |
$287.46
|
|
|
 |
Model #CA10A
The Bogen CA-Series Call-In Switches are attractive, functional units for call-in from classrooms or other staff
locations to Bogen’s PI35A and SI35A Intercom Systems, Multi-Graphic© Series 115B, 2223, and 2233
Institutional/School Communication Systems, and Multicom 2000® Administrative Communica... Find Out More |
$18.25
|
|
|
 |
Model #CA17
The Bogen CA-Series Call-In Switches are attractive, functional units for call-in from classrooms or other staff
locations to Bogen’s PI35A and SI35A Intercom Systems, Multi-Graphic© Series 115B, 2223, and 2233
Institutional/School Communication Systems, and Multicom 2000® Administrative Communica... Find Out More |
$15.21
|
|
|
 |
Model #2518
Connector Kit (30 pcs.), 18 Ga.... Find Out More |
$23.49
|
|
|
 |
Model #2520
Connector Kit (30 pcs.), 20 Ga.... Find Out More |
$23.49
|
|
|
 |
Model #2522
Connector Kit (30 pcs.), 22 Ga.... Find Out More |
$23.49
|
|
|
|
|
|
|
 |
Model #MR8
The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles,
for installations where the RE84 is not used.... Find Out More |
$9.18
|
|
|
 |
Model #RE84
The RE84 is a protective enclosure for an 8" speaker, designed for recessed installations,
and for use with any of the Bogen ceiling grilles. One-piece steel construction
includes a mounting ring and a foam insert to reduce metallic resonance. The
RE84 is finished in rust-resistant black primer a... Find Out More |
$9.98
|
|
|
 |
Model #TB8
The TB8 is a load bearing T-bar support designed to sustain the weight of an 8"
speaker, grille and protective enclosure in suspended ceiling construction. Use of the
TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 20'-
by-4' acoustic ceiling tiles.... Find Out More |
$6.16
|
|
|