Model #WB1EZ Wall Baffle Speakers Wall Mount Speaker 1W, Volume Control, Terminal Strip, single tap Easy Wall Mount Installation! The Bogen WB1EZ Wall Baffle Speaker is an 8" cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille cloth on front. The WB1EZ is a 1-watt single-tap speaker with recessed volume control designed for use in 70V amplifier systems. Designed for easy wall-mount installation, the WB1EZ comes pre-assembled. Read More   $48.46

Model #WBS8T725 Wall Baffle Speakers S86T725 Wall Baffle Speaker Wallnut Finish Bogen offers 8" cone speakers pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front. These wall baffles are handsomely styled and ruggedly built with 3/8" particle board reinforced at the corners. Recessed volume control and terminal strip are available options on the WBS8T725 model. Read More   $37.39

Model #WBS8T725V Wall Baffle Speakers WBS8T725 Wall Mount Speaker with Volume Control Bogen offers 8" cone speakers pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front. These wall baffles are handsomely styled and ruggedly built with 3/8" particle board reinforced at the corners. Recessed volume control and terminal strip are available options on the WBS8T725 model. Read More   $45.90

Model #WBS8T725BR Wall Baffle Speakers WBS8T725 with Terminal Strip Bogen offers 8" cone speakers pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front. These wall baffles are handsomely styled and ruggedly built with 3/8" particle board reinforced at the corners. Recessed volume control and terminal strip are available options on the WBS8T725 model. Read More   $43.47

Model #WBS8T725BRV Wall Baffle Speakers WBS8T725BR Wall Mount Baffle Speaker with Volume Control Bogen offers 8" cone speakers pre-assembled into a simulated walnut-finished wooden enclosure with a black grille cloth on front. These wall baffles are handsomely styled and ruggedly built with 3/8" particle board reinforced at the corners. Recessed volume control and terminal strip are available options on the WBS8T725 model. Read More   $51.30

Model #PG8A Wall Baffle Speakers 13" Round Polished Aluminum Ceiling Speaker Grille Bogen provides a wide selection of attractive ceiling grilles in white enamel or aluminum finishes. Each grille is shipped with the hardware needed to mount a speaker to the grille. Read More   $9.99

Model #PG8W Wall Baffle Speakers 13" Ceiling Speaker Grille, White Finish Bogen provides a wide selection of attractive ceiling grilles in white enamel or aluminum finishes. Each grille is shipped with the hardware needed to mount a speaker to the grille. Read More   $5.94

Model #SG8W Wall Baffle Speakers Round Steel Ceiling Speaker Grille, White Finish, with Hidden Studs Bogen provides a wide selection of attractive ceiling speaker grilles in white enamel or aluminum finishes. Each grille is shipped with the hardware needed to mount a speaker to the grille. Read More   $6.88

Model #WB8 Wall Baffle Speakers Wall Mount Speaker Baffle, Walnut Finish Bogen’s wall mount speaker baffle is ruggedly constructed of 3/8" particle board with reinforced corners. It is finished in simulated walnut and will house any of our 8" speakers. A sloping front panel provides enhanced downward dispersion. Hardware for mounting a speaker to the baffle included. Read More   $17.95

Model #WBS810T725 Wall Baffle Speakers S810T725 Surface Mount Paging Speaker in Wall Baffle The surface mounting loudspeaker shall be a Bogen model WBS810T725, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 70Hz to 15kHz. Axial sensitivity shall be 96dB, at four feet with one-watt input. The loudspeaker shall have a10 oz. ceramic magnet and a 1" voice coil. A transformer, capable of matching an 8-ohm loudspeaker to a 25-volt or 70-volt line, and providing power taps of 4, 2, 1, 1/2, 1/4, and 1/8 watts shall be included. The transformer primary and secondary leads shall be stripped, tinned, and shall be at least 6" in length. The loudspeaker shall be assembled in a wall baffle for surface mounting, angled for additional downward sound dispersion. The baffle shall be constructed of 3/8” particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2"W x 9-1/2"H x 5-1/4"D (top) x 3-1/4"D (base). Read More   $41.58