Model #SM1EZ Ceiling Speakers Easy Install Paging Speaker w/ single tap, 1W The Bogen SM1EZ Easy Install ® Paging Speaker is surface-mount speaker, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling. Third, standard wire nuts make the electrical connection directly to the color-coded studs. The SM1EZ is lightweight, durable speakers with a low-profile contemporary design, making them versatile enough to be installed in just about any installation with standard ceiling tiles. The SM1EZ is a 1-watt single-tap speaker. This model has an exterior volume control for easy balancing that is easily accessible, but doesn’t attract tampering. Read More   $34.07

Model #SMTB Ceiling Speakers Tile Bridge for Easy Install (SM1EZ / SM4T) Speakers (bundle of 5) Tile Bridge for Easy Install Speaker Read More   $22.83

Model #CS1EZ Ceiling Speakers Bogen Ceiling Speakers 1W, Volume Control, Terminal Strip, single tap speaker The Bogen CS1EZ is a pre-assembled 1-watt single-tap ceiling speaker designed for use with 70V amplifier systems. Comprised of an eight-inch cone speaker and 13” diameter steel ceiling grille finished with white enamel, the CS1EZ includes a rear-mounted screw terminal board for fast, easy installation. An accessible volume control knob is located on the faceplate. Read More   $28.34

Model #S810 Ceiling Speakers 8" Paging Ceiling Speaker, 10 oz. Magnet Bogen offers 8" unmounted cone speakers with 6 or 10 oz. magnets. These speakers come wired with a 4-watt speaker matching transformer (T725). Read More   $10.44

Model #CG8A Ceiling Speakers Round Polished Aluminum Speaker Grille (Contoured) Bogen provides a wide selection of attractive ceiling grilles in white enamel or aluminum finishes. Each grille is shipped with the hardware needed to mount a speaker to the grille. Read More   $6.75

Model #CG8AW Ceiling Speakers Round Aluminum Grille, White Finish (Contoured) Bogen provides a wide selection of attractive ceiling grilles in white enamel or aluminum finishes. Each grille is shipped with the hardware needed to mount a speaker to the grille. Read More   $5.74

Model #SM4T Ceiling Speakers Easy Install Paging Ceiling Speaker w/ multiple taps, 4W The Bogen SM1EZ and SM4T Easy Install® Paging Ceiling Speakers are surface-mount speakers, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling. Third, standard wire nuts make the electrical connection directly to the color-coded studs. Both the SM1EZ and SM4T are lightweight, durable speakers with a low-profile contemporary design, making them versatile enough to be installed in just about any installation with standard ceiling tiles. The SM1EZ is a 1-watt single-tap speaker. The SM4T is a 4-watt multi-tap speaker with a rotary switch that eliminates transformer tap wires. Both models have an exterior volume control for easy balancing that is easily accessible, but doesn’t attract tampering. Read More   $36.03

Model #S86T725PG8W Ceiling Speakers S86T725 Ceiling Speaker Assembly With White Speaker Grille The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $17.44

Model #S86T725PG8WVR Ceiling Speakers S86T725PG8W Cone Type Loud Speakers w/ Recessed Volume Control The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $26.85

Model #S86T725PG8WVK Ceiling Speakers S86T725PG8W Ceiling Speaker w/ Volume Control Knob The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $27.42

Model #S86T725PG8WBR Ceiling Speakers S86T725BR Ceiling Speaker on a White 13' PG8W Speaker Grille The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $22.60

Model #S86T725PG8WBRVR Ceiling Speakers S86T725BR Ceiling Speaker on White PG8W Speaker Grille with Recessed Volume Control The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $30.86

Model #S86T725PG8WBRVK Ceiling Speakers S86T725BR Ceiling Speaker on PG8W Speaker Grille w/ Knob Volume Control The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $31.78

Model #S810T725PG8W Ceiling Speakers S810T725 Ceiling Loudspeaker on PG8W Speaker Grille The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $20.76

Model #S810T725PG8WVR Ceiling Speakers S810T725PG8W Ceiling Speaker w/ Recessed Volume Control The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $28.69

Model #S810T725PG8WVK Ceiling Speakers S810T725PG8W Ceiling Speaker w/ Knob Volume Control The Bogen Models S86 and S810 8" cone-type loudspeakers provide excellent sound quality and troublefree operation. Their magnetic structure is designed for maximum air gap energy and the diaphragms have been selected for high sensitivity and optimized response characteristics. The speakers are easy to install in ceiling grilles or wall baffles. Mounting holes have been provided for quick attachment of a transformer. Transformers include the Model T725, which matches an 8-ohm speaker to a 25- or 70-volt line with six power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8 watt), and the Model T72510 which matches an 8- ohm speaker to a 25- or 70-volt line with five power taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts). The S86 and S810 are available in factory assembled versions, with the Model T725 transformer already mounted. The S86 assembly is also available with a terminal strip (-BR), and volume control (-V). Bogen also offers the speakers, fully assembled with a transformer, in an attractively finished wall baffle (Model WB8), or in ceiling grilles for recessed installation. Assemblies are also available with optional volume control and/or terminal strip. Read More   $28.69